- #Do i need asrock xfast lan utility install#
- #Do i need asrock xfast lan utility driver#
- #Do i need asrock xfast lan utility download#
Open the CPU socket without remove CPU protection cover: Disengage the lever by pressing it down and sliding it out of the hook. Type A: CPU protection cover on the top of CPU socket.
#Do i need asrock xfast lan utility install#
There are two different type of CPU protection cover, please check your CPU protection cover type first then follow below SOP to install CPU. After the system has restarted, the Optane Management tool will show Optane memory is enabled.
Launch the Intel Optane Memory and Storage Management tool from the Microsoft store. Enable the Teton Glacier Mode in BIOS and press F10 to save the settings.Īdvanced\Storage Configuration\Teton Glacier Mode\Dynamic Configuration for Hybrid Storage Device Enable
#Do i need asrock xfast lan utility download#
Download and install the Intel Optane Memory and Storage Management tool from the Microsoft store. (or newer) from the link below:(A few restarts will be required)
#Do i need asrock xfast lan utility driver#
Download and install the Intel RST driver version 18. Make sure that H10 Optane memory is installed in the Optane supporting M.2 socket by checking the storage section of the motherboard web page. To enable an Optane H10 while another Intel M.2 SSD is installed, please refer to the following steps: Information such as TPM version can be found in the TPM Management window. Step 3 – The TPM Management window will open. Step 2 – Type in "TPM.MSC" to open the Windows TPM management tool. Step 1 – Press hotkeys "Windows + R” together to open the Run box. To check the TPM version, please refer to the following steps. Step 3 – Click the "Resume protection” as shown in the red-boxed below.įor more information, please refer to the Microsoft website. Step 2 – Click the "Suspend protection” as shown in the red-boxed below. The bitlocker feature can be suspended and resumed when Bitlocker Drive Encryption is enabled. Step 2 – The Bitlocker status is shown under the red-boxed section as in the following picture. Step 1 – Please go to Control Panel > System and Security > Bitlocker Drive Encryption To check the Bitlocker status, please refer to the following steps. Please refer to the following for the Bitlocker status, Suspend / Resume Bitlocker and TPM version information. (a) Go to "Advanced" \ "CPU Configuration" page to find. The actual support may be varied based on official release of Windows 11 by Microsoft®. (b) Enabled "Intel® Platform Trust Technology” under UEFI BIOSįor the new Microsoft® Windows 11 installation, we recommend disabling the CSM setting before using the AMD CPU fTPM. (a) Go to "Security page” to find the "Intel® Platform Trust Technology” option. It supports the TPM2.0 feature without TPM2.0 hardware module.įor the new Microsoft® Windows 11 installation, we recommend disabling the CSM setting before using the Intel® PTT. No, please enabled or feature under UEFI BIOS.
0 kommentar(er)
